Home Up Feedback Contents Search

ASA Safety Supply

A Reputation Of Service Since 1984

 

Pyramex 4 Point Yellow Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • 4 Point Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL028
Pyramex 4 Point Green Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • 4 Point Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL026
Pyramex 4 Point Blue Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • 4 Point Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL027
Pyramex 4 Point Red Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • 4 Point Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL033
Pyramex 4 Point White Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • 4 Point Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL039
Pyramex 4 Point Yellow Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL019
Pyramex 4 Point Green Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL031
Pyramex 4 Point Red Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL034
Pyramex 4 Point Gray Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL035
Pyramex 4 Point Blue Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL040
Pyramex 4 Point White Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL042
Pyramex 4 Point Orange Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL049
Pyramex 4 Point Hi Vis Green Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • CSA Z94.1-05
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.

Part #:

  • AAL056
Pyramex 4 Point White Full Brim Hard Hat w/Ratchet

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hats.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available

Part #:

  • AAL030
Pyramex 6 Point Orange Hard Hat

       

Key Features:

  • Shell constructed from High Density Polyethylene materials
  • Low Profile design
  • Rain trough on sides and back of helmet channel moisture away.
  • Universal accessory slots fit cap mounted ear muffs and chin straps.
  • Snap Lock suspension features “tuck away” adjustments for all day, hassle free wear.
  • Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, and E
  • Soft brow pad is replaceable and washable
  • Replacement suspensions and headbands available.
     

Part #:

  • AAL041

MSA Tan Skullgard Full Brim w/Fas-Trac Ratchet Suspension

       

Key Features:

  • Skullgard Caps and Hats feature heavy duty construction for use in steel mills and other heavy industries where elevated temperatures are common.
  • Skullgard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI
    Z89.1 1997,Class G (electrical—low voltage) (formerly Class A).

Part #:

  • ASA806
MSA V-Gard Full Brim White w/Fas-Trac
Suspension

       

Key Features:

  • MSA V-Gard Non-Slotted Hats meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions(Class E).
  • V-Gard Hats meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA000
MSA V-Gard Hard Hat White w/Staz-On
Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA002
MSA V-Gard Hard Hat Blue w/Staz-On
Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA003
MSA V-Gard Hard Hat White w/Fas-Trac Ratchet Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA005
MSA V-Gard Hard Hat Yellow w/Staz-On Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA011
MSA V-Gard Hard Hat Blue w/Fas-Trac Ratchet Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA012
MSA V-Gard Hard Hat Tan w/Staz-On Suspension

       

Key Features:

  • MSA V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
  • V-Gard Caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA030
MSA Vented V-Gard Hard Hat White w/4-Point Fas-Trac Suspension

       

Key Features:

  • Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort
  • Glaregard® Surface underbrim to reduce reflective glare
  • Lateral contours above ear for easy hearing protection integration
  • Rain trough extends all the way around the brim
  • V-Gard 500 Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E).
  • These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA013
MSA Vented V-Gard Hard Hat Yellow w/4-Point Fas-Trac Suspension

       

Key Features:

  • Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort
  • Glaregard® Surface underbrim to reduce reflective glare
  • Lateral contours above ear for easy hearing protection integration
  • Rain trough extends all the way around the brim
  • V-Gard 500 Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E).
  • These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA014
MSA Vented V-Gard Hard Hat Green w/4-Point Fas-Trac Suspension

       

Key Features:

  • Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort
  • Glaregard® Surface underbrim to reduce reflective glare
  • Lateral contours above ear for easy hearing protection integration
  • Rain trough extends all the way around the brim
  • V-Gard 500 Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E).
  • These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA024
MSA Vented V-Gard Hard Hat Hi-Vis Orange w/4-Point Fas-Trac Suspension

       

Key Features:

  • Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort
  • Glaregard® Surface underbrim to reduce reflective glare
  • Lateral contours above ear for easy hearing protection integration
  • Rain trough extends all the way around the brim
  • V-Gard 500 Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E).
  • These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA025
MSA Vented V-Gard Hard Hat Blue w/4-Point Fas-Trac Suspension

       

Key Features:

  • Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort
  • Glaregard® Surface underbrim to reduce reflective glare
  • Lateral contours above ear for easy hearing protection integration
  • Rain trough extends all the way around the brim
  • V-Gard 500 Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E).
  • These caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
  • Look for the official reverse donning logo to determine if your hard hat may be worn backwards without voiding approvals.

Part #:

  • MSA026
 

 

 

 

Send mail to Rpatch@asasafety.com with questions or comments about this web site.
Copyright © 2011 ASA Safety Supply
Last modified: December 13, 2012