Home Up Feedback Contents Search

ASA Safety Supply

A Reputation Of Service Since 1984

 

N750027 Seal Check / Filter Cover

       

Key Features:

  • Seal Check / Filter Cover for 7506N95, 7506N99 and 7506R95 Filters.
  • Attaches to Gas and Vapor Cartridges.

Part #:

  • NOR025
770016 Replacement Cartridge Connector

       

Key Features:

  • Replacement cartridge connector for 5500, 7700, 5400, 7600, and 7800 Series.
  • 2 per pack

Part #:

  • NOR020
770017 Replacement Inhalation Valve

       

Key Features:

  • Replacement Inhalation Valve For 7700 series masks.

Part #:

  • NOR021
770018 APR and Continuous Flow Exhalation Valves

Key Features:

  • APR and Continuous Flow Exhalation Valves
  • For 7700 series masks.

Part #:

  • NOR022
770019 APR and Continuous Flow Exhalation Valve Seats

Key Features:

  • Exhalation Valve Seats
  • For 7700 series masks.

Part #:

  • NOR023
770092 Cradle Suspension System (Harness)

       

Key Features:

  • Cradle Suspension System (Harness)
  • For 7700 Series

Part #:

  • NOR024
Peel-Away Windows

       

Key Features:

  • Accessories for the 7600 Series Full Facepiece.
  • 5 per package.

Part #:

  • NOR028
   

 

Mylar Lens Cover For 7000 Series Mask

       

Key Features:

  • Use with 3M Full Facepieces 7000 Series to help protect lens.

Part #:

  • MMM001
Inhalation Port Gasket For  6000 Series And 7800S

       

Key Features:

  • Replaceable orange gasket used on the 3M Full Facepiece Respirators 6000 Series and 7800S

Part #:

  • MMM008
Exhalation Valve For 7800S

       

Key Features:

  • Replacement part for 3M Full Facepieces 7800S.

Part #:

  • MMM009
Inhalation Valve For 6000 Series Mask

       

Key Features:

  • Inhalation Valve For 6000 Series Mask

Part #:

  • MMM010
Head Harness Assembly For 6000 Series Half Facepiece

       

Key Features:

  • Use as a replacement part for 3M Half Facepieces 6000 Series.
     

Part #:

  • MMM013
Speedglas Outside Protection Plate 9000

       

Key Features:

  • High temperature outside protection plate for 3M  Speedglas™ Filters Utility and 9000 Series.

Part #:

  • MMM021
Filter Retainer For Respirators 5000 Series and 3M Cartridges 6000 Series

       

Key Features:

  • Used to hold 3M Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M Respirators 5000 Series and 3M Cartridges 6000 Series

Part #:

  • MMM024
Head Harness Assembly For 7501, 7502 and 7503 Half Facepiece

       

Key Features:

  • This assembly is designed to be used with the 3M Half Facepiece Respirators 7501, 7502 and 7503.

     

Part #:

  • MMM033
Exhalation Valve For 7000 Series And Center Adapter On 6000 Series Full Facepiece

       

Key Features:

  • This valve is used with the 3M Half Facepiece Respirators 7000 Series, and also used with the 3M Center Adapter 6864 on the 3M Full Facepiece Respirators 6000 Series.
     

Part #:

  • MMM034
Inhalation Valve For Half Facepiece Respirators 7501, 7502, and 7503
 

       

Key Features:

  • This is a replacement inhalation valve designed for 3M Half Facepiece Respirators 7501, 7502, and 7503
     

Part #:

  • MMM035
Replacement Hood With Collar For H-411 and H-412.

       

Key Features:

  • H-Series hoods provide head and neck protection from pesticide and chemical overspray, lightweight, loose fitting, for use with belt-mounted PAPRs or supplied air components.
  • This hood is a replacement for 3M Hood Assemblies H-411 and H-412.

Part #:

  • MMM041
Faceshield Cover For H-Series Hoods

       

Key Features:

  • This cover helps keep the lens on the 3M H-Series Hoods clean.
  • When vision becomes obstructed, the cover can be peeled off leaving a clean shield.

     

Part #:

  • MMM042
Cap Suspension For H-411, H-421, H-611 Hoods

       

Key Features:

  • This suspension snaps to the faceshield allowing the hood to move as the wearer turns.
  • Size can be adjusted to fit individual workers.
  • For H-411, H-421, H-611 Hoods

     

Part #:

  • MMM043
Vortex Cooling Assembly For H-Series Hoods And Whitecap Helmets.

       

Key Features:

  • Used to regulate the flow and cool the compressed air to 3M Hoods H-Series and Whitecap Helmets.
  • This NIOSH approved assembly helps create more comfortable positive pressure for the user.
  • The vortex assembly can cool compressed air by as much as 50°F (10°C).
  • It can operate on pressures ranging from 60-90 psig, depending on hose length.
  • It includes the cooler with quick disconnect fitting, waist belt and holder.

     

Part #:

  • MMM044
 
Send mail to Rpatch@asasafety.com with questions or comments about this web site.
Copyright © 2011 ASA Safety Supply
Last modified: December 13, 2012