Home Feedback Contents Search

ASA Safety Supply

A Reputation Of Service Since 1984

 

Helmet L-901 With Wide-View Faceshield

       

Key Features:

  • This helmet can be used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It meets ANSI Type I, II hardhat requirements.
  • It has shroud options and provides an assigned protection factor of 1000 x PEL.

Part #:

  • L-901
Helmet L-905 With Welding Shield And Wide-View Faceshield

       

Key Features:

  • This helmet can be used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It meets ANSI Type1, II hardhat requirements.
  • It has shroud options and provides protection up to 1000 x PEL.

Part #:

  • L-905
Bumpcap L-501 With Wide-View Faceshield

       

Key Features:

  • This bumpcap with wide-view faceshield can be used with certain 3M Powered Air Purifying Respirators or Supplied Air Respirator systems to help provide respiratory protection for a variety of applications.
  • Allows the user to wear most prescription glasses.

Part #:

  • L-501
Bumpcap L-503 With Welding Shield

       

Key Features:

  • This bumpcap is used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It is available with an autodarkening lens and other options to enhance productivity and safety.
  • It provides bumpcap protection.

Part #:

  • L-503
Bumpcap L-505 With Welding Shield And Wide-View Faceshield

       

Key Features:

  • This bumpcap is used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It is available with an autodarkening lens for productivity and safety.
  • It provides bumpcap protection.

Part #:

  • L-505
Hard Hat L-701 With Wide-View Faceshield

       

Key Features:

  • This hardhat is used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It can be used in applications where ANSI Type I, II hardhat protection is needed.
  • It has an assigned protection factor of 25 x PEL.

Part #:

  • L-701
Hard Hat L-703 With Welding Shield

       

Key Features:

  • This hardhat can be used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • It is designed for welding operations which must have industrial protective headgear.
  • It has an assigned protection factor of 25 x PEL.

Part #:

  • L-703
Hard Hat L-705 With Welding Shield And Wide-View Faceshield

       

Key Features:

  • This hardhat can be used with 3M Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems.
  • Meets ANSI Type I, II requirements for industrial protective headgear.
  • It has an assigned protection factor of 25 x PEL.

Part #:

  • L-705
V-100 Supplied Air Respirator Vortex Cooling Assembly

       

Key Features:

  • This supplied air respirator assembly, when used with approved breathing tube and headgear, can help regulate the flow and temperature of supplied air system.
  • Cools the air up to 50F (28C).
  • Includes the cooling tube, waist belt and holder.

Part #:

  • V-100
V-200 Versaflo Vortemp Heating Assembly

       

Key Features:

  • This assembly helps regulate the flow and temperature of the supplied air system.
  • It keeps the worker comfortable by heating air by as much as 50F (28C).
  • This assembly includes the heating tube, waist belt and holder.

Part #:

  • V-200
V-300 Versaflo Air Regulating Valve Assembly

       

Key Features:

  • Allows the worker to set the airflow to the most comfortable level.
  • Includes the valve and waist belt.
  • It is strictly a regulator and will not warm or cool supplied air to the worker.

Part #:

  • V-300
V-400 Versaflo Low Pressure Connector Assembly

       

Key Features:

  • This assembly is approved for supplied air systems that use 3M Low Pressure Hoses W-3020-25/07033(AAD), W-3020-50/07034(AAD), and W-3020-100/07035(AAD) at pressures between 6-15 psig.
  • It includes the connector and waist belt.

Part #:

  • V-400
L-122 Breathing Tube For L-Series

       

Key Features:

  • Used with the 3M Headgear L-Series.
  • It is attached to the opening on the headgear.
  • The lower end of the breathing tube is attached to the air control device.

Part #:

  • L-122
   

 

Send mail to Rpatch@asasafety.com with questions or comments about this web site.
Copyright 2011 ASA Safety Supply
Last modified: December 13, 2012